PowerFloor

Not propping: No requirement for rigid propping, as panel are supported by the joists
Good load carrying capacity: Hebel PowerFloor systems can support a maximum uniformly distributed load of 5kPa, or concentrated (point) load of 1.8kN over a load are of 350mm2 with joists at 600mm maximum centres.
Low wastage: Minimal on-site cutting as panels are supplied in standard lengths to suit joist spacing.
Rapid installation: Typical placement rates of 70m2/day can be achieved.
Tranquility: Hebel PowerFloor is designed for superior acoustic insulation.
Termite resistant: AAC is not a food source for termites.
No pre-drilling required
Fire resistance: Excellent resistance to fires.
Solidity: Hebel PowerFloor is extremely strong and each panel is reinforced with corrosion-protected steel mesh.
Thermal Resistance: Hebel PowerFloor’s better thermal efficiency.

Blocks
CSR Hebel produces a wide range of solid masonry blocks for a variety of construction applications. Hebel blocks are most commonly and effectively used for load bearing wall construction.

Thermoblocks have excellent thermal insulation properties. Sonoblocks are manufactured to a higher density that provides superior acoustic insulation.

Hebel Lintels are also available to negate the need for steel over window and door openings.

Thick (mm)	m2 / Pallet	Blocks / Pallet
75	24.48	204
100	21.60	180
125	17.28	144
150	14.40	120
200	10.08	84
250	8.64	72
300	7.20	60

Thick (mm)	m2 / Pallet	Blocks / Pallet
100	11.52	96
150	7.20	60
200	5.76	48

Thick (mm)	m2 / Pallet	Blocks / Pallet
100	21.60	90

Thick (mm)	m2 / Pallet	Blocks / Pallet
100	21.60	180
150	14.40	120
200	34.56	288
225	32.40	240
250	28.80	192

Thick (mm)	Height (mm)	Length (mm)	Supply
300	300	1200	Pallet
400	400	1500	Pallet

Length (mm)	Height (mm)	Opening Size (mm)	Weight (kg)
1200	300	900	34.2
1900	300	1500	54.2
2200	300	1800	62.7
3000	400	2400	114

Length (mm)	Height (mm)	Opening Size (mm)	Weight (kg)
1200	300	900	51.3
1900	300	1500	81.2
2200	300	1800	94.1
3000	400	2400	171

Length (mm)	Height (mm)	Opening Size (mm)	Weight (kg)
1200	300	900	68.4
1900	300	1500	108
6000	600	5000	684

Hebel PowerPanelXL is now a more efficient way to build

The Hebel PowerPanelXL External Wall System, now 20% lighter

Hebel PowerPanelXL panels are faster to install and require significantly less labour compared to traditional masonry construction techniques, which leads to substantial savings in site costs.

Being a lightweight concrete reinforced with steel, Hebel PowerPanelXL panels pass the critical ‘knock test’. They are lightweight yet solid and tough as brick.

Hebel’s unique AAC construction provides superior insulation qualities for a masonry product.

For unit and home owners, the thermal efficiencies of Hebel reduces the reliance on heating and cooling appliances – the combined effects of using a heater less in winter and fans or air conditioning less in summer and warmer months, can have a big impact on rising energy costs.

Hebel is non-combustible and renowned for its highly fire resistant properties.

The PowerPanelXL External Wall System achieves a FRL (Fire Resistance Level) up to 180 minutes (assessed by CSIRO). Highly fire resistant means peace of mind and added security for you and your family or customers.

Hebel pioneered the introduction of lightweight wall panels providing acoustic performance levels at or above Rw + Ctr = 50 in high rise multi-residential buildings. A sound reason for better acoustic qualities.

As environmental consciousness and social responsibility increases, Hebel is striving to exceed further to set new sustainability standards in building materials and residential living. Hebel uses 61% and 64% less embodied energy and 64% and 55% less greenhouse gas emissions than the comparative products, concrete and brick veneer respectively.